Home » DTH bits » DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer
DTH Hammers & Bits Manufacturer

DTH Hammers & Bits Manufacturer

D Miningwell’s down-the-hole drill bits are made of alloy steel and advanced heat-treated high-quality alloy steel to ensure good drilling performance and long service life. Widely used by customers all over the world.

Rated 4.5/5 based on 251 customer reviews
Contact US Get Price
Share:
Previous:
Next:
Content

D Miningwell DTH bits are paired with the corresponding hammer (bore diameter and spline configuration). Customers can customize their DTH bits in various ways, such as changing tungsten carbide inserts (spherical, ballistic, etc.), surface profiles (flat, concave, convex, etc.) and flush holes.

CIR series DTH bits(Low pressure)

Technical Parameters
Model： Gauge buttons(mm) Front buttons(mm) Tail shank diameter(mm) Port holes Weight(KG)
CIR76-76 φ12*5 φ12*3 φ43 2 2.1
CIR90-90 φ14*6 φ13*2+φ12*2 φ53.5 2 3.7
CIR90-110 φ14*6 φ13*3+φ12*3 φ53.5 3 4.6
CIR90-130 φ14*7 φ13*3+φ12*4 φ53.5 3 6
CIR110-110 φ14*6 φ13*3+φ12*3 φ64 3 6
CIR110-130 φ14*7 φ13*3+φ12*4 φ64 3 7.4
CIR110-150 φ14*8 φ14*3+φ13*6 φ64 3 9.6
CIR110-170 φ15*9 φ14*6+φ13*10 φ64 3 12.3
CIR110-200 φ15*9 φ14*6+φ13*12 φ64 3 16.5
CIR150-150 φ16*9 φ14*6+φ14*4 φ89.5 3 14.8
CIR150-175 φ16*9 φ14*6+φ14*5 φ89.5 3 19
CIR170-175 φ16*9 φ14*6+φ14*5 φ102 3 21
CIR170-185 φ16*9 φ14*6+φ14*6 φ102 3 21.8

DHD series DTH bits(High pressure)

Technical Parameters
Model： Head diameter： Shank length： Spline： Port holes： Gauge buttons： Front buttons： Weight：
DHD25A-76 76 174 6 2 φ14mm*6 φ11mm*4 3.2kg
DHD35A-90 90 180 8 2 φ14mm*6 φ12mm*5 4.7kg
DHD35A-100 100 180 8 2 φ14mm*6 φ12mm*5 4.8kg
DHD340-108 108 209 8 2 φ16mm*7 φ14mm*6 7.85kg
DHD340-130 130 209 8 2 φ16mm*8 φ14mm*4+φ13mm*3 8.88kg
DHD350-140 140 260 8 2 φ18mm*7 φ15mm*4+φ14mm*3 15.8kg
DHD350-152 152 260 8 2 φ18mm*8 φ14mm*8 17kg
DHD350-178 178 260 8 2 φ18mm*8 φ16mm*6+φ14mm*5 20.4kg
DHD360-154 154 308.5 8 2 φ18mm*8 φ16mm*4+φ15mm*4 22.5kg
DHD360-178 178 308.5 8 2 φ18mm*8 φ16mm*6+φ15mm*5 26.1kg
DHD360-203 203 308.5 8 2 φ18mm*10 φ16mm*8+φ15mm*6 30.4kg
DHD380-203 203 350 10 2 φ18mm*10 φ18mm*4+φ16mm*10 48.5kg
DHD380-254 254 350 10 2 φ18mm*12 φ18mm*12+φ16mm*8 62.4kg

Inquiry


    More DTH bits
    DTH Bits – Rock Drilling Tools – D Miningwell

    D Miningwell down-the-hole drills use high-quality steel and cemented carbide as raw materials. After a special heat treatment process, the hardness of the button bit is achieved under rock excavation, and the energy loss in the transmission process is reduced, and the teeth are evenly stressed. The teeth and teeth are not easy to fall out, so the impact energy is concentrated on the rock to achieve high-efficiency driving.
    DTH Bits – Rock Drilling Tools – D Miningwell
    DTH Hammer Bits and Hammers for water well drill rig

    D Miningwell’s down-the-hole drill bits are made of alloy steel and advanced heat-treated high-quality alloy steel to ensure good drilling performance and long service life. Widely used by customers all over the world.
    DTH Hammer Bits and Hammers for water well drill rig
    DTH Hammers and Bits for the Water Well industry

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    DTH Hammers and Bits for the Water Well industry
    Carbide Low Air Pressure Bit CIR Series-DTH Drill Bits factory

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    Carbide Low Air Pressure Bit CIR Series-DTH Drill Bits factory
    DTH Drilling Tools-dth button bits

    D Miningwell’s down-the-hole drill bits are made of alloy steel and advanced heat-treated high-quality alloy steel to ensure good drilling performance and long service life. Widely used by customers all over the world.
    DTH Drilling Tools-dth button bits
    Water well drilling bits and tools manufacturers

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 20 years, we have exported dth hammers bits to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Water well drilling bits and tools manufacturers
    Drilling Tools dth hammers bits for the Water Well industry

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 30 years, we have exported this drill bit to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Drilling Tools dth hammers bits for the Water Well industry
    Drilling Tools mining drill bit suppliers and manufacturers

    D Miningwell down-the-hole drills are mainly used in geological exploration, coal mines, water conservancy and hydropower, roads, railways, bridges, construction, etc.
    Drilling Tools mining drill bit suppliers and manufacturers
    DTH Bits – Rock Drilling Tools

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 30 years, we have exported this drill bit to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    DTH Bits – Rock Drilling Tools
    Tungsten Carbide Low Pressure Water Well Drill Bits

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    Tungsten Carbide Low Pressure Water Well Drill Bits
    Drilling Tools dth hammers and bits consumables

    D Miningwell down-the-hole drills are mainly used in geological exploration, coal mines, water conservancy and hydropower, roads, railways, bridges, construction, etc.
    Drilling Tools dth hammers and bits consumables
    DTH Hammer Bits For Water Well

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    DTH Hammer Bits For Water Well
    Down the Hole (DTH) Drilling Tools | Bits, Pipes, Rods

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 30 years, we have exported this drill bit to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Down the Hole (DTH) Drilling Tools | Bits, Pipes, Rods
    High Performance Low Pressure DTH Bits Shank CIR

    D Miningwell down-the-hole drills use high-quality steel and cemented carbide as raw materials. After a special heat treatment process, the hardness of the button bit is achieved under rock excavation, and the energy loss in the transmission process is reduced, and the teeth are evenly stressed. The teeth and teeth are not easy to fall out, so the impact energy is concentrated on the rock to achieve high-efficiency driving.
    High Performance Low Pressure DTH Bits Shank CIR
    Drilling DTH Bits – DTH Mining Bits

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 30 years, we have exported this drill bit to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Drilling DTH Bits – DTH Mining Bits
    DTH Hammers Button Bits Suppliers

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 20 years, we have exported dth hammers bits to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    DTH Hammers Button Bits Suppliers
    CIR90-90mm Low Air Pressure DTH Drill Bit

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    CIR90-90mm Low Air Pressure DTH Drill Bit
    DTH Drilling tools – DTH Drill Bits

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 20 years, we have exported dth hammers bits to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    DTH Drilling tools – DTH Drill Bits
    Drilling Tools borewell bit suppliers and manufacturers

    D Miningwell down-the-hole drills are mainly used in geological exploration, coal mines, water conservancy and hydropower, roads, railways, bridges, construction, etc.
    Drilling Tools borewell bit suppliers and manufacturers
    Mining and Well Drilling Bits DTH Drill Rock Button Bit

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    Mining and Well Drilling Bits DTH Drill Rock Button Bit
    Down the Hole Drill Bit for Water Well Drilling

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 20 years, we have exported dth hammers bits to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Down the Hole Drill Bit for Water Well Drilling
    Down the hole (DTH) Hammer Bits for borehole drilling

    D Miningwell’s down-the-hole drill bits are made of alloy steel and advanced heat-treated high-quality alloy steel to ensure good drilling performance and long service life. Widely used by customers all over the world.
    Down the hole (DTH) Hammer Bits for borehole drilling
    Down The Hole Drilling – DTH Bits

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 20 years, we have exported dth hammers bits to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Down The Hole Drilling – DTH Bits
    Drilling Tools dth drill bit for the Water Well industry

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 30 years, we have exported this drill bit to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Drilling Tools dth drill bit for the Water Well industry
    Drilling Tools borehole drill bit suppliers and manufacturers

    D Miningwell down-the-hole hammer drill bits are made of carbide inserts and steel. Widely used in water well drilling and protection of hard rock formations. In the past 30 years, we have exported this drill bit to many countries with good feedback. You are welcome to contact us if you need. We can supply all series of drilling equipment and drilling tools.
    Drilling Tools borehole drill bit suppliers and manufacturers
    DTH bits – Down the hole drilling

    D Miningwell’s down-the-hole drill bits are made of alloy steel and advanced heat-treated high-quality alloy steel to ensure good drilling performance and long service life. Widely used by customers all over the world.
    DTH bits – Down the hole drilling
    Low Pressure DTH Drill Bit for borehole drilling

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    Low Pressure DTH Drill Bit for borehole drilling
    Tungsten Carbide Drill Bit– Quality Supplier from China

    D Miningwell dth hammer is connected with dth drill bit for drilling engineering. D Miningwell uses high-quality steel, alloy steel as raw materials, adopts special heat treatment process and advanced cemented carbide inserting technology, so that dth hammers bits can function well even on hard rock formations, and at the same time save energy.
    Tungsten Carbide Drill Bit– Quality Supplier from China
    D Mininwell | DTH Hammers & Drilling Consumables

    D Miningwell’s down-the-hole drill bits are made of alloy steel and advanced heat-treated high-quality alloy steel to ensure good drilling performance and long service life. Widely used by customers all over the world.
    D Mininwell | DTH Hammers & Drilling Consumables
    Mining Tool -dth hammers bits

    D Miningwell down-the-hole drills use high-quality steel and cemented carbide as raw materials. After a special heat treatment process, the hardness of the button bit is achieved under rock excavation, and the energy loss in the transmission process is reduced, and the teeth are evenly stressed. The teeth and teeth are not easy to fall out, so the impact energy is concentrated on the rock to achieve high-efficiency driving.
    Mining Tool -dth hammers bits
    Tel: 0086-18157003050
    E-mail: info@dminingwell.com
    Whatsapp: 8618157003050
    Link:
  • Floating Fish Feed Machines for Sale
    • Copyright © Zhejiang Miningwell Supply Chain Management Co., Ltd. All Rights Reserved