Taper bits 32mm 11°

In addition to the correct choice of carbide grade, the efficiency of rock drilling is influenced by many factors, mainly the shape of the drill head, the hardness of the rock, the compressed air pressure, the method of powder discharge, the diameter of the borehole and the depth of the borehole.

Different rock formations and rock drills require different cone angles. Wide cone angles are often used when drilling with high impact hydraulic rock drills in moderately hard to hard and abrasive rock formations. Modern drill rigs typically use 11 and 12 taper angles. For low impact rock drills and softer rock formations, use a narrow taper angle of 7. The 7 angle can also be used if you have problems with the bit rotation when using the 11 and 12 equipment. Also, the 4.8 angle is perfect for soft rock when using a pneumatic or hydraulic drill to prevent the bit from spinning or falling off. A single drill pipe is used to drill short holes (≤2.0m), while a drill pipe that can be connected is used to drill deeper holes (>2.0m) to avoid excessive bending stress.