Sando yekuchera matsime emvura inonyanya kushandiswa mumigodhi, quarry, kuvaka migwagwa uye mamwe mainjiniya ekuchera makomba makomba, kuchengetedzwa kwevhu, kusimbisa nzvimbo yedhamu, anchoring nemamwe makomba einjiniya, hydrology, makomba emvura nemimwe minda.
1. Chibooreso hachidi machubhu enylon, nokudaro kubvisa dambudziko remachubhu enylon ari kuputsika, kukuvadzwa uye kuoma nekuda kwekuwedzera kwekupisa uye kuderera.
2. DTH nyundo isina naironi chubhu ine simba rakaderera rekushandisa, yakakwira simba frequency, uye kumhanya kwekuchera i15% -30% nekukurumidza kupfuura imwecheteyo mhando yeDTH sando ine naironi chubhu.
3. Nokuti chimiro chacho chiri nyore kwazvo uye zvikamu zvakavimbika, DTH nyundo iri nyore kuchengetedza uye ine hupenyu hurefu hwebasa.
| Technical Parameters | |||||
| Model | CIR50 | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 628mm | 5.5kg | φ46mm | CIR50 | φ50-60 | F32X8PIN |
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16.6Hz | 40-55r"'/min | 50L"'/s | 60L"'/s | 75L"'/s |
| Model | D56 | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 668mm | 5.8kg | φ46mm | 56 | φ50-60 | F32X8PIN |
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16.6Hz | 40-55r"'/min | 50L"'/s | 60L"'/s | 75L"'/s |
| Model | CIR76A | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 772mm | 14.7kg | φ68mm | CIR76 | φ76-80 | F48X10PIN |
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16.6Hz | 30-80r"'/min | 55L"'/s | 65L"'/s | 80L"'/s |
| Model | CIR90A | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 796mm | 20.3kg | φ80mm | CIR90 | φ90-130 | F48X10PIN |
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16.6Hz | 30-80r"'/min | 75L"'/s | 95L"'/s | 110L"'/s |
| Model | CIR90B | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 782mm | 19.7kg | φ80mm | CIR90 | φ90-130 | F48X10PIN |
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16.5Hz | 30-80r"'/min | 85L"'/s | 105L"'/s | 120L"'/s |
| Model | CIR110A | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 838mm | 35.86kg | φ101mm | CIR110 | φ110-135 | API23"'/8Reg |
| Bhokisi | |||||
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16.2Hz | 25-50r"'/min | 100L"'/s | 130L"'/s | 155L"'/s |
| Model | CIR150A | ||||
| Urefu (Zvishoma) | Huremu (Zvishoma) | Kunze dhayamita | Bit Shank | Hole Range | Connection Thread |
| 901mm | 68.6kg | φ137mm | CIR150 | φ155-178 | F75*10Bhokisi |
| WorkingPressure | Impactrateat0.63Mpa | Recommend edrotation speed | Kushandiswa kwemhepo | ||
| 0.5Mpa | 0.63Mpa | 1.0Mpa | |||
| 0.5-1.0Mpa | 16Hz | 20-40r"'/min | 220L"'/s | 255L"'/s | 300L"'/s |
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.png)
